High Adhesive Hot Melt Glue Stick

                        What is the use of Hot Melt Glue strip?

Hot Melt glue strip is a solid adhesive made of ethylene-vinyl acetate polymer (EVA), composed of modified rosin resin or petroleum resin, which does not contain water or solvents.
Hot melt strip color is white opaque, easy to use, continuous use without carbonization phenomenon. Usually the shape of Hot Melt Adhesive is stick and granular, hot melt adhesive is non-toxic, tasteless green environmental protection adhesive. In the specified temperature range, the physical state of the hot melt adhesive changes with the change of temperature, but the chemical properties are unchanged. Hot melt strip structure: The composition of hot melt strip is EVA (ethylene-vinyl acetate) 56%, adhesive resin 44%.

First, the use of Hot Melt Rubber Strip
The use of hot melt rubber strip is relatively large, which can be used in handicrafts, toys, packaging boxes, decorations, crafts, wood, plastics, textile samples, electronics, electrical accessories, ceramics, etc., play a fixed role in each other, and often used in factories and families.
Due to the special use of Resin EVA hot melt adhesive, hot melt adhesive is required to have a certain melting viscosity, so as to ensure that EVA hot melt adhesive has good fluidity and wettability at melting temperature, and can have full penetration and bonding strength for paper fibers. If the melt viscosity of EVA hot melt adhesive is too low, the amount of glue on the back of the book will be insufficient; The melting viscosity is too high, the fluidity is poor, affecting the bonding effect of the back of the book, and it is easy to produce loose pages or cracks on the back of the book.

Second, the use of hot melt strip
When using the hot melt strip, it is necessary to glue with the Glue Gun. It is necessary to put the rubber strip into the hot melt glue gun, plug in the electric heating for a period of time, and pull the trigger, the glue will flow out of the gun. You can also burn one end of the hot melt strip directly with a lighter, then apply it to the area you want to stick, and wait until the glue becomes solid. Like bonding cartons, handicrafts, handmade, etc., it is convenient and easy to use, and will be more solid than ordinary glue.