Hot Melt Glue Stick Yellow Adhesive Strip

               What are the precautions for Hot Melt gun strips?

1. Hot melt gun strip (rod) will absorb water after contact with the air, and because it can not be determined from its appearance whether to absorb water, and hot melt strip containing water is easy to produce bubbles when melting, thus weakening the strength, so it needs to be sealed to prevent water inhalation after use.
2. Hot Melt Adhesive strip/bar is a non-toxic strip of solid material that does not require special safety treatment, but the melt-like one should avoid contact with the skin to avoid damage.

How to use Binding Agent strip?

When using the hot melt strip, it is necessary to glue with the Glue Gun. It is necessary to put the rubber strip into the Hot Melt Glue gun, plug in the electric heating for a period of time, and pull the trigger, the glue will flow out of the gun. You can also burn one end of the hot melt strip directly with a lighter, then apply it to the area you want to stick, and wait until the glue becomes solid. Like bonding cartons, handicrafts, handmade, etc., it is convenient and easy to use, and will be more solid than ordinary glue.

Storage method of hot melt adhesive strip
1. Hot melt strip can not stand high temperature, should be stored in a cool place, general transportation and storage environment temperature between minus 7℃ to 50℃ can be.
2. Avoid sun exposure.
3. If the storage of Hot Melt Rubber Strip meets the above two conditions, it can be stored for 1 year.