Automotive oil filter hot melt adhesive characteristics

Automotive oil filter Hot Melt Adhesive characteristics

1, Hot Melt adhesive, because of 100% solid content, no solvent, low odor, environmental protection, non-toxic, rapid curing, extensive bonding materials, suitable for automated production, is the development direction of adhesives used in the automotive filter industry;
2, the selection and use of Binding Agent, in order to achieve a good bonding effect, you need to understand the performance of hot melt adhesive, comprehensive consideration of the bonding process, the requirements of the main engine factory on the filter, the storage and use of the filter environment and other factors.
3, at higher or lower temperatures, in gasoline and oil and other media, the bonding is still solid, stable performance products, as well as cost pressure, which will be one of the development directions of automotive filter cleaner hot melt adhesive.
4, "the application of hot melt adhesive in automotive filter" is a research topic, the need for hot melt adhesive manufacturers, automotive filter cleaning manufacturers, hot melt adhesive coating Equipment manufacturers, host manufacturers information sharing, together to study, in order to better promote the development of the industry, reduce information asymmetry caused by waste.

Influencing factor

1, the performance of hot melt adhesive itself
Color, odor, viscosity, softening point, resistance to high temperature and low temperature, adhesion, stripping, pulling force, TG, etc.
2. The substrate is glued
The surface density, polarity, weather resistance, intimacy with adhesive, substrate temperature and so on have great influence on bonding.
3. Gluing equipment and process
The glue melting capacity, glue supply capacity, stability, machine running speed, pressing time, pressing force, the working habits of the operator, etc., all affect the bonding effect;
4. Environmental factors
The temperature and humidity of the environment during the gluing process have great influence on the bonding. The environmental conditions of the bonded product in the production cycle such as transportation, storage and use put forward the requirements for bonding, vibration, high temperature, low temperature, media and other environmental factors.

Hot Melt Adhesive For Filter